I am getting file system utilization threshold breached but currently no active alarms able to see. In below output at two places can see high disk utilization. Can someone tell me if this is an issue and how we can reduce it asap ?
xx# show disks details
RAID Physical disk information:
disk00: Online 3LM1EJQP 286102 MB
disk01: Online 3SJ08VNJ 286102 MB
disk02: Online 3SJ07PE9 286102 MB
disk03: Online 6SJ4N980 286102 MB
RAID Logical drive information:
raid-disk: RAID-5 Okay 858000 MB
Enabled (read-cache) Enabled (write-back)
Mounted file systems:
MOUNT POINT TYPE DEVICE SIZE INUSE FREE USE%
/sw internal /dev/sda1 991MB 927MB 64MB 93%
/swstore internal /dev/sda2 991MB 533MB 458MB 53%
/state internal /dev/sda3 7935MB 236MB 7699MB 2%
/local/local1 SYSFS /dev/sda6 33725MB 963MB 32762MB 2%
/state/likewise/sw
internal /dev/sda1 991MB 927MB 64MB 93%
/state/likewise/local/local1
internal /dev/sda6 33725MB 963MB 32762MB 2%
/local/local1/spool
PRINTSPOOL /dev/data1/spool 991MB 32MB 959MB 3%
/obj1 CONTENT /dev/data1/obj 224176MB 3303MB 220873MB 1%
/ackq1 internal /dev/data1/ackq 2379MB 1MB 2378MB 0%
/plz1 internal /dev/data1/plz 7141MB 0MB 7141MB 0%
