cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

LWAPP-3-REPLAY_ERR: [SA]spam_lrad.c:39933 The system has received replay error on slot 0, WLAN ID 3, count 4 from AP

dablakester
Level 1
Level 1
Hi, Could the above error, which I am getting off of every radio on nearly 100 APs, be because of Load Balancing? We are getting a lot of clients being kicked off and the logs are FULL of these errors - non stop. This link in Cisco... https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-0/message/guide/sysmsg80/lradsim_lwapp_msgs15.html#pgfId-1008440 ..refers to the following explanation and recommendation but no real explanation of how you check for replay errors. "Explanation The controller has received a replay error on the specified AP and WLAN. Recommended Action Check if there is a replay attack in the network." There are loads of posts on here regarding this error but no real answers. Can anybody help?
Who Me Too'd this topic