Hi,
I have two 6807 chassis with VSS architecture. Each Chassis has two VS-SUP2T-10Gs. Is the following upgrade process correct?
1.Upload IOS File to bootdisk:
#copy tftp: bootdisk:
#copy bootdisk: sw1-slot4-bootdisk:
#copy bootdisk: slavebootdisk:
#copy bootdisk: sw2-slot4-bootdisk:
2.Configure the boot statement to boot
(config)#no boot system flash bootdisk:/old_ios_name.bin
(config)#boot system flash bootdisk:/new_ios_name.bin
#show bootvar
#wr
3.All Device Reload
#reload
