Hello,
I am not able to get windows 7 and windows 10 machines to be profiled properly with ISE 2.3 patch 2.
These endpoints are identified as " Microsoft-Workstation" all the time. I have enabled "RADIUS", "SNMP", "DHCP" , "NMAP" and "Active-Directory" probes. I have added ISE IP as IP helper-address in the distribution switch which is the gateway for the users. The switches are 3850 switches in stack. Please let me know
1- Which probe is the best for identifying Microsoft clients?
2- Currently device sensor configuration is not done on the switches. Is it mandatory to have these commands in the switches in order for RADIUS probes to work properly?
Please help me to sort of this issue.
