06-30-2017 10:08 AM
Hi,
For a customer POC, I have a question relating to what the custom attribute should look like for users accounts authenticating from an APIC GUI to ISE using Tacacs.
I have configured the network devices with a network device group, configured the Tacacs Profiles and configured the device admin policy sets. Based on searches, I’ve tried the following cisco av-pair=shell:domains = all/admin/,common//read-all and is not working.
Anyone able to share what the Profile Attributes that are required in a raw view format in the TACACS Profile? This would be simple if it was IOS with shell and privilege levels, but APIC is a web based GUI.
Any pointers would be appreciated.
Ian
Solved! Go to Solution.