08-07-2018 01:55 AM - edited 03-08-2019 03:51 PM
Hi,
after an IOS update from version c2960x-universalk9-tar.152-2.E6 to c2960x-universalk9-tar.152-4.E6 we are getting the message
%ILET-1-AUTHENTICATION_FAIL: This Switch may not have been manufactured by Cisco or with Cisco's authorization. This product may contain software that was copied in violation of Cisco's license terms. If your use of this product is the cause of a support issue, Cisco may deny operation of the product, support under your warranty or under a Cisco technical support program such as Smartnet. Please contact Cisco's Technical Assistance Center for more information.
every 5 minutes on the console of the 2960X-48-LPS-L switch.
Switch#show license
Index 1 Feature: lanlite
Period left: 0 minute 0 second
Index 2 Feature: lanbase
Period left: 0 minute 0 second
We´ve downgraded and upgraded it already to several different versions (and always rebooted it by disconnecting power for at least 5 minutes, neither stacking module nor SFP modules present), but the error message still remains.
Any suggestions?
Many thanks!
Heinz