Who Me Too'd this topic

Hi, i have a network with redundancy HSRP between my two cores, but  one of them 

it stopedd working (CORE1). does not recongnize standby commands, i try to enable with standby console enable command but it does not work. Attach images !

The information from two Core's is the following:

(INFORMATION FROM CORE1 WITH HSRP DISABLED) :

Chassis Type : WS-C4507R+E

Power consumed by backplane : 40 Watts

Mod Ports Card Type Model Serial No.
---+-----+--------------------------------------+------------------+-----------
1 48 10/100/1000BaseT EEE (RJ45) WS-X4748-RJ45-E CAT1625L1SR
2 12 10GE SFP+ WS-X4712-SFP+E CAT1629L16E
3 4 Sup 7-E 10GE (SFP+), 1000BaseX (SFP) WS-X45-SUP7-E CAT1809L3A0

M MAC addresses Hw Fw Sw Status
--+--------------------------------+---+------------+----------------+---------
1 d48c.b5e1.6ee0 to d48c.b5e1.6f0f 1.1 Ok
2 a493.4c5f.5548 to a493.4c5f.5553 1.1 Ok
3 30f7.0d06.6700 to 30f7.0d06.6703 2.1 15.0(1r)SG5 03.04.06.SG Ok

Mod Redundancy role Operating mode Redundancy status
----+-------------------+-------------------+----------------------------------
3 Active Supervisor RPR Active

SOLCL-CORE1-TI#sh redundancy
Redundant System Information :

------------------------------
Available system uptime = 41 weeks, 5 days, 22 hours, 23 minutes
Switchovers system experienced = 0
Standby failures = 0
Last switchover reason = none

Hardware Mode = Simplex
Configured Redundancy Mode = RPR
Operating Redundancy Mode = RPR
Maintenance Mode = Disabled
Communications = Down Reason: Simplex mode

Current Processor Information :
------------------------------
Active Location = slot 3
Current Software state = ACTIVE
Uptime in current state = 41 weeks, 5 days, 22 hours, 22 minutes
Image Version = Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (c
at4500e-UNIVERSALK9-M), Version 03.04.06.SG RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Mon 04-May-15 02:44 by prod
BOOT = bootflash:cat4500e-universalk9.SPA.03.04.06.SG.151-2.SG6.bin,12;
Configuration register = 0x2102

Peer (slot: 4) information is not available because it is in 'DISABLED' state

(INFORMATION FROM CORE2 WITH HSRP DISABLED)

SOLCL-CORE2-TI#show module
Chassis Type : WS-C4507R+E

Power consumed by backplane : 40 Watts

Mod Ports Card Type Model Serial No.
---+-----+--------------------------------------+------------------+-----------
1 48 10/100/1000BaseT EEE (RJ45) WS-X4748-RJ45-E CAT1640L2XE
2 12 10GE SFP+ WS-X4712-SFP+E CAT1641L2JU
3 4 Sup 7-E 10GE (SFP+), 1000BaseX (SFP) WS-X45-SUP7-E CAT1642L6WJ

M MAC addresses Hw Fw Sw Status
--+--------------------------------+---+------------+----------------+---------
1 e4d3.f186.df00 to e4d3.f186.df2f 1.1 Ok
2 e4d3.f1fd.d360 to e4d3.f1fd.d36b 1.1 Ok
3 6c20.5691.ab40 to 6c20.5691.ab43 2.1 15.0(1r)SG5 03.03.00.SG Ok

Mod Redundancy role Operating mode Redundancy status
----+-------------------+-------------------+----------------------------------
3 Active Supervisor SSO Active

SOLCL-CORE2-TI#show redund
SOLCL-CORE2-TI#show redundancy
Redundant System Information :

------------------------------
Available system uptime = 42 weeks, 11 minutes
Switchovers system experienced = 0
Standby failures = 0
Last switchover reason = none

Hardware Mode = Simplex
Configured Redundancy Mode = Stateful Switchover
Operating Redundancy Mode = Stateful Switchover
Maintenance Mode = Disabled
Communications = Down Reason: Simplex mode

Current Processor Information :
------------------------------
Active Location = slot 3
Current Software state = ACTIVE
Uptime in current state = 42 weeks, 7 hours, 4 minutes
Image Version = Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch S
oftware (cat4500e-UNIVERSALK9-M), Version 03.03.00.SG RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Sun 15-Apr-12 08:06 by prod
BOOT = bootflash:cat4500e-universalk9.SPA.03.03.00.SG.151-1.SG.bin,1;
Configuration register = 0x2101

Peer (slot: 4) information is not available because it is in 'UNKNOWN' state