Hello,
I need to isolate a population connected on some dedicated peripherical switches.
These peripherical switches are connected on a WS-C3750G-12S-S. Ip routing is enabled on these switches. Vlan Level 3 with ospf process is running between the two WS-C3750G-12S-S and some others routers.
the IOs version on the WS-C3750G-12S-S is : c3750-ipservicesk9-mz.122-44.SE3
My question :
Is possible to configure the WS-C3750G-12S-S with vrf lite mode ? and so to apply the vrf to some interfaces dedicated to the population i want to isolate.
Thierry Jean.
