01-02-2019 09:11 PM
Hi everyone,
I am implementing Cisco ISE 2.4 in LAB environment with a 2960S switch. I am trying to apply a default ACL on access ports to allow DNS and DC access before dot1x authentication. Unfortunately, the existing image does not support port-based ACLs. Does anyone know which IOS image should I use for this switch to implement dot1X with Cisco ISE?
Existing image is: c2960s-universalk9-mz.152-2.E9.bin
Any help in this regard is highly appreciated.
Thanks,
Kevin
Solved! Go to Solution.