Hi all,
we have to connect Domain A , B and C to obtain Multicast Stream on Domain C from Domain A and B.
As per existent setup on Domain A and B we can't use MDSP default peer to establish the MSDP tunnel, between the domains we have IGP as Routing Protocol but not BGP.
The interconnection between Domain A,B and C is regulated by Firewalls.
We have noticed RPF check failed and checking the feature I've noticed that to avoid that we have to use: mesh group or RFC4611 (If recent (but not currently widely deployed) router code is running that is fully compliant with the latest MSDP document, another option, to work around not having BGP to MSDP RPF peer, is to RPF using an IGP like OSPF, IS-IS, RIP, etc. This new capability will allow for enterprise customers, who are not running BGP and who don't want to run mesh groups, to use their existing IGP to satisfy the MSDP peer-RPF rules.)
How can I enable the RFC4611 support? Is per default enabled or are there specific command?
If I explicitly configure rfp with the command "ip msdp rpf rfc3618" then rfc4611 is disabled?
Thanks a lot for the support
BR
Omar
