03-04-2019 06:47 AM - edited 07-05-2021 09:58 AM
I'm running ME8.8.111.0 in a small setup with 3 APs and was wondering why DCA with channel-width "best" sticks with 20MHz channels. I tried to set them to 40MHz instead of "best":
>config advanced 802.11a channel dca chan-width 40
ERROR: Configured DCA channels are in invalid combination for selected Channel Width.
Checking the channels looks normal to me:
Leader Automatic Channel Assignment Channel Assignment Mode........................ AUTO Channel Update Interval........................ 600 seconds Anchor time (Hour of the day).................. 0 Update Contribution Noise........................................ Enable Interference................................. Enable Load......................................... Disable Device Aware................................. Disable CleanAir Event-driven RRM option............... Enabled CleanAir Event-driven RRM sensitivity.......... Medium CleanAir Event-driven RRM Rogue Option......... Disabled Channel Assignment Leader...................... aplnt1 (192.168.1.1) (::) Last Run....................................... 430 seconds ago Last Run Time.................................. 0 seconds DCA Sensitivity Level.......................... MEDIUM (15 dB) DCA 802.11n/ac Channel Width................... BEST DBS Max Channel Width.......................... 40 MHz DCA Minimum Energy Limit....................... -95 dBm Channel Energy Levels Minimum...................................... -86 dBm Average...................................... -86 dBm Maximum...................................... -86 dBm Channel Dwell Times Minimum...................................... 12 days, 03 h 31 m 44 s Average...................................... 37 days, 10 h 04 m 25 s Maximum...................................... 79 days, 03 h 07 m 18 s 802.11a 5 GHz Auto-RF Channel List Allowed Channel List......................... 36,40,44,48,52,56,60,64,100, 104,108,112,116,120,124,128, 132,136,140 Unused Channel List.......................... DCA Outdoor AP option.......................... Disabled
Any idea why the controller complains about an invalid combination?
Thanks,
Andreas