Hi All,
I would like to communicate 2 different IP block on the switch.
Model Name : SG250-26
GE5 : Vlan50 --> 192.168.5.1
GE6 : Vlan60 --> 192.168.6.1
Pc s connected to GE5 : 192.168.5.2
Pc s connected to GE6 : 192.168.6.2
Steps i did ;
Created Vlans (at vlan settings under the vlan management ) Pic 1
Port vlan membership then hit the ethernet interface and join vlan (pic2, 2.2 )
Under IP configuration add the vlans and set up the default gateways for ports. (pic3)
I also tried to do that same way with CLI commands.
Used some videos as references below :
https://video.cisco.com/detail/video/5993973920001/configuring-inter-vlan-routing-on-sg250-series-switches?autoStart=true&page=1&q=router
I still have no connection between two VLANS i can ping from PC1 to second gateway (192.168.5.2 to 192.168.6.1) but i can not ping to PC (192.168.6.2)
Does anyone know what i am missing ?
thanks.
