Hello,
I have been trying to solve this project that was provided in my course.I am rather confused as to how to correctly construct my diagrams. I have googled as to how to configure ripv2, dhcp, vlan with vlsm and static routing. but I can't seem to draw the diagram properly. I have a router restriction on my project I am very confused as to how to finish this. If anyone can help me with drawing the diagram I can hopefully finish the rest.
I kind of tried everything I could. I failed.
The project is this:
Project BNK:
Network Requirements:
BNK Bank has 4 branches spread out in the city.
1. Main Motijheel Branch
o Consists of 200 hosts.
2. Dhamondi Branch
o Consists of 100 hosts.
3. Gulshan Branch
o Consists of 120 hosts.
4. Uttara Branch
o Consists of 90 hosts.
Some things to keep in mind while designing the network:
● Use routers/switches wherever required.
● But the bank cannot afford to have more than 3 routers. Each branch should be a separate
network.
● Install at least 2 PC/Laptop for each individual network
● All the branches should be able to communicate with each other.
● The main Branch should have the connection to the ISP for the Internet. It should have
redundant connections with the other branches. The bank has an application server, which is
used by it’s customers for online transactions and a database server which is used by the
branches.
● The Internet in this example consists of ONLY 2 servers i.e (Google and Gmail )
● RIPv2 routing protocol should be used between the internal routers and static routing with the
ISP router. A static host route should be configured in the ISP for the application server for
faster service. The redundant links between branches should serve as back ups.
● Private IP network address used by the university is 192.168.0.0/16
● All the branches should get their IP through DHCP.
● The ISP has allocated 8 public addresses for this bank, 13.100.96.35 – 42/26. The first two
addresses are statically allocated for the application server and database server at the main
branch. All private addresses allocated must be translated to public when accessing the
Internet.
● The customers and the main branch should have access to the application server.
● Main branch should have access to the Internet anywhere.
● The other branches are only allowed to access the Gmail server.
Deliverable:
The network mentioned above should be implemented in packet tracer, with necessary devices and
full configuration.
After completion you should be able to test the conditions imposed.
As hard copies, you will have to submit the network topology diagram with proper labels and also all
the configurations of all the routers that you have implemented.
