08-19-2019 12:46 AM
Hello,
I have a problem at upgrading the ROMMON of two ESP40.
I posted this comment in an existing thread, but without feedback.
I have some ASR1006 chassis with 2x RP2, 2x ESP40 and 2x SIP40 (2x SPA-10G cards in the SIPs).
During the migration I completely followed the official Cisco instructions: https://www.cisco.com/c/en/us/td/docs/routers/asr1000/release/notes/xe-16-9/asr1000-rel-notes-xe-16-9.html#concept_zdm_2nx_5bb
Especially regarding the recommended ROMMON versions:
Cisco IOS XE Release | ASR 1000 RP2 | ASR 1000-SIP40 | ASR 1000-ESP40 |
16.9.x | 16.9(5r) | 16.3(2r) | 16.3(2r) |
All RPs run on IOS XE 16.9.3 and ROMMON Verion 16.9(5r).
All SIP40s run on ROMMON version 16.3(2r).
Only a few (not all) ESP40 can not be upgraded to 16.3(2r).
The following error message appears:
Target copying rom-monitor image file cp: omitting directory '/' md5sum: /: Is a directory md5sum: /bootflash/EFI/UpdateCapsule/UpdateCapsuleFile.bin: No such file or directory
Does anyone have any idea where the problem is or how to solve it?
Below you can see the whole CLI output:
Router# sh ver Cisco IOS XE Software, Version 16.09.03 Cisco IOS Software [Fuji], ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.9.3, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2019 by Cisco Systems, Inc. Compiled Wed 20-Mar-19 08:02 by mcpre Router# sh platform Chassis type: ASR1006 Slot Type State Insert time (ago) --------- ------------------- --------------------- ----------------- 0 ASR1000-SIP40 ok 00:04:27 0/0 SPA-1X10GE-L-V2 ok 00:03:05 0/2 SPA-1X10GE-L-V2 ok 00:02:57 1 ASR1000-SIP40 ok 00:04:27 1/0 SPA-1X10GE-L-V2 ok 00:03:05 1/2 SPA-1X10GE-L-V2 ok 00:02:53 R0 ASR1000-RP2 ok, active 00:04:27 R1 ASR1000-RP2 ok, standby 00:04:27 F0 ASR1000-ESP40 ok, active 00:04:27 F1 ASR1000-ESP40 ok, standby 00:04:27 P0 ASR1006-PWR-AC ok 00:03:56 P1 ASR1006-PWR-AC ok 00:03:55 Slot CPLD Version Firmware Version --------- ------------------- --------------------------------------- 0 00200800 16.3(2r) 1 00200800 16.3(2r) R0 10021901 16.9(5r) R1 10021901 16.9(5r) F0 1003190E 16.2(1r) F1 1003190E 15.3(3r)S
Thanks!
Solved! Go to Solution.