Hey there,
currently we are exchanging our 2960s / x for 9200 switches.
Unfortunately older IP POE cameras do not come online.
With the old switches we got the IP cameras online with the following commands:
interface GigabitEthernet1/0/1
switchport access vlan 7
switchport mode access
no cdp enable
power inline consumption 8000
power inline static max 8000
storm-control broadcast level pps 100
storm-control action trap
spanning-tree portfast
spanning-tree bpduguard enable
However, the 9200 switch does not support it power inline consumption 8000.
Is there a way to set the power without poe class to 8000?
