10-17-2019 09:10 PM - edited 10-17-2019 09:43 PM
tried clearing my 3850 u threw several different things tried including upgrading and downgrading the software every time the switch reboots the express setup loads then at the end it displays the message startup-config ignored. so, http secure server configuration not dun. im assuming that means it is still set to ignore the boot config i have tried unset SWITCH_IGNORE_STARTUP_CFG and get a read only error software version is 03.07.05 there is no config i need to save if i could just wipe everything to a clean switch is what i tried to do at this point i just need it to boot and retain the config what would be my next steps?
pleas note also noticed that
SWITCH_IGNORE_STARTUP_CFG=1 is present
resolved by entering boot loader while hoalding the mode button while starting up till lights go orange
then use command SWITCH_IGNORE_STARTUP_CFG=0 then BOOT