10-22-2019 11:14 PM - edited 10-22-2019 11:17 PM
Greetings,
Can someone share their knowledge and experience to explain below troubleshoot scenario.
Customer has two existing L3 3560 switches. We need to connect 6 Moxa industrial switches to cisco switches as shown in pic attached. Customer doesnot want any vlan on moxa switches as there is only industrial traffic.
Customer has given defalt gateway of a.b.x.250
Now what additional configuration should be done on cisco switch. I created vlanx, int vlanx with ip as default gateway a.b.x.250 and configure port to moxa as trunk or access (as no vlan in moxa).
The link is up between cisco and moxa but no ping is working between cisco and moxa
Pls advise
Default Gateway | Managed Switch IP address | Moxa SWITCH NAME | ||
a.b.x.250 | a.b.x.200 | MOXA-SW01 | ||
a.b.x.250 | a.b.x.201 | MOXA-SW02 | ||
a.b.x.250 | a.b.x.118 | sw03 | ||
a.b.x.250 | a.b.x.119 | sw04 | ||
a.b.x.250 | a.b.x.120 | sw05 | ||
a.b.x.250 | a.b.x.121 | sw06 |
Solved! Go to Solution.