Alright community - SAVE ME! I've been looking through all of the documentation and I'm stumped. How do I convert a CAPWAP 4800 to mobility express? I've looked through this: https://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/810/release_notes/b_ME_RN_810.html#me-supp-ap
and it says it is supported and I've downloaded the correct tar file and issued:
ap-type mobility-express tftp://10.72.222.55/AIR-AP4800-K9-ME-8-10-105-0.tar
I get:
Starting the ME image download...
It may take a few minutes to finish download.
If it is longer, please abort command, check network connection and try again
curl: (71) Error
transfer command failed
Image transfer failed. Please try again
I am sure that the TFTP process is correct because I put another AP on the same subnet and downloaded another image from the same TFTP server without an issue. I'm looking at this:
https://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/810/user_guide/b_ME_User_Guide_810/about_mob_exp.html
and it appears that the 4800 is not supported as mobility express? So which is it?
