cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

CISCO MOBILITY - AIR-AP2802I - SSID NOT BROADCASTING - BLUE,RED and GREEN blinking lights

Tonton
Level 1
Level 1

Hi Team,

 

I am deploying Cisco mobility using a cisco AIR-AP2802I-S-K9 as the master AP (running as controller ). Initially my AP is running at CAPWAP 8.3.143.0 image that is why i did not upgrade the image image. 

 

The only upgrade i did is to the mobility express image which is AIR-AP2800-K9-ME-8-5-151-0.tar.

 

After the reboot i ensure that the image has been upgrade and the AP Image type and AP Configuration is at MOBILITY EXPRESS IMAGE and  MOBILITY EXPRESS CAPABLE.

 

After all the checking. Still the AP is not broadcasting the "CiscoAirProvision " SSID. The AP is also showing BLUE,RED and GREEN blinking lights.


Kindly see attached file for the initial reboot and the show ver

 

AP Running Image : 8.5.151.0
Primary Boot Image : 8.5.151.0
Backup Boot Image : 8.3.143.0
AP Image type : MOBILITY EXPRESS IMAGE
AP Configuration : MOBILITY EXPRESS CAPABLE

 

thanks

 

 

 

Who Me Too'd this topic