01-26-2020 06:20 AM - edited 07-05-2021 11:35 AM
Hello,
I'm playing with two "28021-E-K9" AP with the IOS AIR-AP2800-K9-ME-8-5-151-0.tar installed in console session in CLI mode with a tftp server.
When I connect both AP on my network one become Master and the other one is in the AP list. Good.
But if I create a new SSID, save the conf and force the second AP to be master I lost the newlly created SSID.
If I force the first one to be Master again, I retrive the SSID.
Why ?
It seems there is no configuration synchronisation between ME controllers
Is the two "controllers" must have the same IP adress and name or not ?
It's more easy to use the same IP because when you switch you'll use the same IP to connect to the new elected master.
I tried both options and I have the same problem.
Other strange things I dont have the "Create group" button in advanced mode.
Any ideas ?
Many thanks
Solved! Go to Solution.