03-11-2020 11:29 AM
I got a Cisco 2911 that I have installed an 8port Analog card on Slot1 and an 4 port FXO port card on EHWIC2. When I boot up the router I get the following error message. Not sure what to do from here. Can I add more memory to the router, or do something else?
Mar 11 17:34:03.703: %DSPRM-3-INSUFFICIENT_DSP:
voice-port : 1/0/2 Not initialized due to insufficient DSP resources
Mar 11 17:34:03.703: %DSPRM-3-INSUFFICIENT_DSP:
voice-port : 1/0/3 Not initialized due to insufficient DSP resources
Mar 11 17:34:03.703: %DSPRM-3-INSUFFICIENT_DSP:
voice-port : 1/0/4 Not initialized due to insufficient DSP resources
Mar 11 17:34:03.703: %DSPRM-3-INSUFFICIENT_DSP:
voice-port : 1/0/5 Not initialized due to insufficient DSP resources
Mar 11 17:34:03.703: %DSPRM-3-INSUFFICIENT_DSP:
voice-port : 1/0/6 Not initialized due to insufficient DSP resources
Mar 11 17:34:03.703: %DSPRM-3-INSUFFICIENT_DSP:
voice-port : 1/0/7 Not initialized due to insufficient DSP resources
Mar 11 17:34:03.703: %DSPRM-3-INSUFFICIENT_DSP:
voice-port : 1/0/8 Not initialized due to insufficient DSP resources
Mar 11 17:34:03.703: %DSPRM-3-INSUFFICIENT_DSP:
voice-port : 1/0/9 Not initialized due to insufficient DSP resources
Mar 11 17:34:03.703: %DSPRM-3-INSUFFICIENT_DSP:
voice-port : 1/0/10 Not initialized due to insufficient DSP resources
Mar 11 17:34:03.703: %DSPRM-3-INSUFFICIENT_DSP:
voice-port : 1/0/11 Not initialized due to insufficient DSP resources
Mar 11 17:34:03.703: %DSPRM-3-INSUFFICIENT_DSP:
voice-port : 1/0/12 Not initialized due to insufficient DSP resources
Mar 11 17:34:03.703: %DSPRM-3-INSUFFICIENT_DSP:
voice-port : 1/0/13 Not initialized due to insufficient DSP resources
Mar 11 17:34:03.703: %DSPRM-3-INSUFFICIENT_DSP:
voice-port : 1/0/14 Not initialized due to insufficient DSP resources
Mar 11 17:34:03.703: %DSPRM-3-INSUFFICIENT_DSP:
voice-port : 1/0/15 Not initialized due to insufficient DSP resources
Mar 11 17:34:03.703: %DSPRM-3-INSUFFICIENT_DSP:
voice-port : 1/0/16 Not initialized due to insufficient DSP resources