Hello
Can you please tell me what is the best Upgrade combination possible for my Actual setup.
Switch#sh module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 48 CEF720 48 port 1000mb SFP WS-X6748-SFP SALxxxxxx
5 5 Supervisor Engine 720 10GE (Active) VS-S720-10G SALxxxxx
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 f866.f232.718c to f866.f232.71bb 2.4 12.2(18r)S1 12.2(33)SXI1 Ok
5 68ef.bd83.18b0 to 68ef.bd83.18b7 3.2 8.5(4) 12.2(33)SXI1 Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
1 Centralized Forwarding Card WS-F6700-CFC xxxxxxxxxxx 4.1 Ok
5 Policy Feature Card 3 VS-F6K-PFC3C xxxxxxxxxxx 1.1 Ok
5 MSFC3 Daughterboard VS-F6K-MSFC3 xxxxxxxxxxx 5.1 Ok
Also I checked the information on Cisco EOL and replacement Options.
| Device | End Of Sale | Last Date of Supprt HW | Replacement Part Number | Replacement Product Description |
| | | | | |
| Cisco Catalyst 6506-E - (1)* | 30/10/2020 | 31/10/2025 | Hardware | Catalyst 9600, Catalyst 6800 |
| Cisco Catalyst 6800/6500 Line Cards (WS-X6748-SFP) - (2)* | 30/04/2016 | 30/04/2021 | C6800-48P-SFP | C6K 48-port 1GE Mod: fabric-enabled with DFC4 |
| VS-S720-10G ???? - (3)* | 31/07/2015 | 31/07/2020 | VS-S2T-10G ?? | Cat 6500 Sup 2T with 2 x 10GbE and 3 x 1GbE with MSFC5 PFC4 |
| VS-F6K-PFC3C - (3)* | 31/07/2015 | 31/07/2020 | There is currently no replacement product available for this product. | - |
| VS-F6K-MSFC3 - (3)* | 31/07/2015 | 31/07/2020 | There is currently no replacement product available for this product. | - |
In here this Supervisor module hasn't got a replacement. So what could be the best combination of hardware to replace my actual set up. I need two sets.
Many thanks in advance.
