Hi, because of security advisory CVE-2020-3382 I decided to upgrade my DCNM installation to 11.4(1)
I was running 11.1(1) ova version on esxi server standalone install (no ha)
I followed this guide , and performed the "Inline Upgrade for DCNM Virtual Appliance in Standalone Mode
"procedure , everything went ok without any errors , but the web interface doesn't start , https://dncm_ip doesn't respond .
After scanning open ports , port 443 doesn't appear to be open on the server.
Any idea what could be the problem? Thanks
[root@cisco-dcnm ~]# appmgr status all
DCNM v11 will only use HTTPS. Insecure access via HTTP is disabled.
Please use the url https://<DCNM-IP-ADDRESS> or https://<HOSTNAME> to launch the DCNM UI.
DCNM Status
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
=== ==== == == ======= ====== ===== = ==== ==== ======= =======
2899 fmserver 20 0 12.2g 3.4g 15572 S 0.0 14.4 964:52.71 java
Telemetry Infra Status
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
=== ==== == == ======= ====== ===== = ==== ==== ======= =======
738 root 20 0 796716 5240 3452 S 0.0 0.0 5:35.89 telemetry-infra
TFTP Status
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
=== ==== == == ======= ====== ===== = ==== ==== ======= =======
1374 root 20 0 27168 1060 808 S 0.0 0.0 0:00.00 xinetd
DHCP Status
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
=== ==== == == ======= ====== ===== = ==== ==== ======= =======
1401 dhcpd 20 0 103636 5780 3488 S 0.0 0.0 0:19.65 dhcpd
AMQP Status
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
=== ==== == == ======= ====== ===== = ==== ==== ======= =======
1376 rabbitmq 20 0 6000172 81168 4220 S 0.0 0.3 90:03.01 beam.smp
[root@cisco-dcnm ~]# appmgr show version
Cisco Data Center Network Manager
Version: 11.4(1)
Install mode: LAN Fabric
Standalone node. HA not enabled.
