Hi, community,
I'm presenting an issue in my AP AIR-CAP1552C-A-K9 is raising the CPU utilization to 100%, I would like to know if this problem is coming from a known Bug.
In the Show Process CPU I saw this info too:
Device#show proc cpu
CPU utilization for five seconds: 100%/0%; one minute: 100%; five minutes: 100%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
....
59 949346508 112540706 8435 99.44% 99.36% 99.32% 0 NCI Rx
Thanks a
