Hi,
We've installed about 60 of these switches, seem to be getting odd behavior from time to time. Sometimes all PoE devices will be unreachable and ports will be in a state that can't be fixed by disabling/enabling PoE.
To get around it, you either have to reboot the switch, or the quick 'fix' I found today was to type..
conf
power inline limit-mode port
(press y to restart PoE on switch)
I noticed in the firmware notes, it lists PoE as a recent fixed, wondering if this is something still being worked on.
Having this problem with about 5% of PoE devices. All of them are Unifi AC-Lite.
