Dear all,
we have Cisco Cloud hosted controllers with vManage running 20.6.1.
We tried this deployment many times in our testing tenant with success but for some reason we cannot make it work in Production tenant.
I am trying to to create Cloud Gateway using vManage workflow.
I tried -
- use the whole workflow from vManage
- create NVA in Azure Marketplace and let vManage discover it
In both case, vWan and vHub are pre-created in Azure environment.
This guide served as the basis.
https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/cloudonramp/ios-xe-17/cloud-onramp-book-xe.pdf
The issue
After successfully creating Cloud Gateway to Azure, both NVA (C8000v) appears unreachable in vManage and we cannot reach public or private addresses. Provisioning finishes with "success" however both NVA are unreachable. We tested it even with permit any any configuration on both internal and external firewall in Azure.
As I said, this is working for us in test environment, but for some reason not in production. Only difference is testing have 20.5.1, production has 20.6.1 and we have testing controllers in our public cloud, while production is hosted in Cisco cloud. Any ideas?
Thank you for any output.
