I'm hoping someone can point me in the right direction.
I have several Cisco CBS350 switches deployed and during a recent power outage, several of them lost parts of their configuration. A couple lost port trunk configuration, whilst others lost their VLAN IP address.
Fortunately I run them on a VLAN 1 and another management VLAN so I can always get to them via 2 different IP addresses. This has been my saviour.
Not sure why.....The config is always written after changes have been made. This has happened on several occassions so I frequently log into them and do the config save to be sure. (I've saved the config both via the WEB interface and using SSH).
Would the mirror-configuration have anything to do with this? If I reboot the device cleanly, all is good. It seems a sudden power outage cause strange results.
Thanks in advance.
