Weird issue here. I have 2 Nexus 9300 running version 10.1(2) and both are encountering the same issue. I am setting up Radius on them and have entered all the info for the servers, groups, and associated access rules (such as "aaa authentication login default group radius <RADIUS GROUP NAME HERE> local"). Once I have configured all of this the info disappears outside of the access rules that I set up. I can see the info initially when I do a show run and show radius / radius-servers. I do a copy run start and try to login (unsuccessfully, it tells me it can't reach the configured radius servers). I go back in and all the info is gone and when I check the show run and sh radius / radius-servers it show 0 servers configured and 0 groups. Now when I go back in and try to re-add the servers with the radius key it tells me "Radius Command failed to comply". Also, I was going to reset the AAA settings by removing the AAA new-model and reapplying it but it does not seem to exist on the Nexus switches either. I have many catalyst switches and have never had an issue like this just the Nexus ones. Any help would be greatly appreciated!!
Thanks,
Chris
