I am hoping someone can help me with something very annoying. We have a 4 Nexus 93180YC-FX switches running code version 10.3.3. In our environment, we must run FIPS and we must also run ISE 3.1 with Radius DTLS. I've discovered if the switch is running FIPS mode, there can be no radius-server host x.x.x.x statements. I get that. So I disabled FIPS and rebooted the switch. I still get the error that my radius-server host statements cannot be applied. The last time I ran into this, I backed up my config and did a write erase / reload. Then, my configuration for radius-server worked fine. The ultimate goal is to move from Radius, to radius DTLS using ISE and then enabling FIPS. My fear is, if I enable FIPS, I may never be able to make changes to my Radius-server hosts without having to do write erase / reload. What am I missing? Why is it when FIPS mode is Disabled, still causes issues when trying to modify or add/remove radius server hosts? Is there something else in the config that's causing this? Thanks...
