We have tried upgrading from Cisco AnyConnect 4.10.07073 to Secure Client 5.1.1.42 with NAM connecting to wired and wireless networks.
After the upgrade NAM fails to acquire the IP address from the phone.
Connecting to enterprise EAP SSIDs and other user specified WPA2-PSK wireless networks still work fine, it's just tethering to iPhones that doesn't work.
Un-installing Secure Client 5.1.1.42 and doing a reboot, then re-installing AnyConnect 4.10.07073 with NAM then everything starts working again. A TAC case has been raised but thought I would ask if anyone else is having the same problem.
