When we attempt to configure new ipv4 unicast BGP neighbors, the box informs us that it can't commit the configuration. When we issue the "show configuration failed" command, we get the following error message...'BGP' detected the 'warning' condition 'Neighbor/group is not activated for this address family'(please see attachments for config we are attempting tp push and the error messages)
address-family ipv4 unicast
route-policy cEDGE_SERVICE_IN in
!!% 'BGP' detected the 'warning' condition 'Neighbor/group is not activated for this address family'
route-policy cEDGE_SERVICE_OUT out
!!% 'BGP' detected the 'warning' condition 'Neighbor/group is not activated for this address family'
