03-08-2024 09:31 PM
Scenario:
I have one router, 3 switches, 6 computers and 6 vlans.
vlan 10: 192.168.10.1
vlan 20: 192.168.20.1
vlan 30: 192.168.30.1
vlan 40: 192.168.40.1
vlan 50: 192.168.50.1
vlan 60: 192.168.60.1
I need vlan 10 and 20 to communicate, as well as vlan 50 and 60 to communicate. I managed to do this with trunk allowed and encapsulation but vlan 10 and 20 can see vlan 50 and 60. How do I prevent them from seeing each other and only see the ones I mentioned above?
if you could help me, I would appreciate it very much.
Solved! Go to Solution.