Hi, We´ve been using XRd as a way to do integration testing with our autoprovisioning platform using gnmi.
This works great.
However I'm currently trying to do end to end testing of the whole solution with actual traffic forwarding across the finished service.
(A simple ping test from the CPE to a loopback on a remote SE).
Routing/LDP is up and running and all the XRd nodes have reachability and signal the PWHE correctly, it is UP/UP.
But trying to forward traffic through it fails.
Ive simplified the setup to be more minimal for testing. but still seeing the same issue
The configuration on AGG1:
Configuration on AGG2 is mirrored.
CPE1 has a ip interface with 1.1.1.1/24 trying to ping 1.1.1.2 on CPE2.
The packets are received on AGG1 and sent across mpls to AGG2.
As can be seen on wireshark:
AGG2 however does not seem to recognise that these should be sent out to CPE2. and reports nothing received or sent in the show l2vpn group g xc p details output.
Is this something that simply does not work on the XRd-control plane version?
Or should it work but with restrictions to performance.
We would just like to do simple verification of the configured service in this virtual environment.
-Anders
