06-08-2006 05:29 AM - edited 02-21-2020 12:57 AM
Hello,
I recently had to re-format, add a new activation-key, and add the asdm504.bin and asa704-k8.bin to my ASA 5520 (I accidentaly erased the memory on the machine). Now currently everytime I use the "reload" command it just loads straight into Rommon#.... when I get to the Rommon# prompt all I have to do is type.... "boot" and it loads my asa704-k8.bin file and loads up my config and looks good. I am just wondering is there a way that I would be able to easily set it so it loads the image automatically?
asa2(config)#show boot
BOOT variable = disk0:/asa704-k8.bin
Current BOOT variable = disk0:/asa704-k8.bin
CONFIG_FILE variable = disk0:/startup-config
Current CONFIG_FILE variable = disk0:/startup-config
asa2(config)# show disk0:
Initializing disk0: cache, please wait....Done.
-#- --length-- -----date/time------ path
8 2995 Jun 07 2006 06:30:02 startup-config
9 5437440 Jun 07 2006 06:18:04 asa704-k8.bin
10 5958324 Jun 07 2006 06:24:08 asdm504.bin
51515392 bytes available (11431936 bytes used)
Thanks,
Chris
Solved! Go to Solution.