06-22-2002 09:29 AM - edited 03-01-2019 10:21 PM
I'm writing some Perl script including SNMP and I'm interested to know if there is a MIB value(s) that provides the equivalent of 'show CAM Dynamic 3/4' on a Cisco switch. I am aware of the following link http://www.cisco.com/warp/public/477/SNMP/cam_snmp.shtml however this information seems extremely complex to provide the MAC addresses on one port. Any ideas?
switch> show cam dynamic 4/4
VLAN Dest MAC/Route Des Destination Ports or VCs
---- ------------------ ----------------------------------------------------
6 08-00-20-76-28-93 4/4
Total Matching CAM Entries Displayed = 1
switch>