Cannot configure RV260W client-site VPN with IPSec for macOS

[vpapula]

Hi,

need a bit of help with configuring RV260W VPN for macOS. I get these 20 rows logged when trying to connect:

07[NET] sending packet

07[ENC] generating INFORMATIONAL_V1 request 2408168880 [ N(NO_PROP) ]

07[IKE] no IKE config found for xx.xx.xxx.xx...yy.yy.yy.yy, sending NO_PROPOSAL_CHOSEN

07[ENC] parsed ID_PROT request 0 [ SA V V V V V V V V V V V V V V ]

07[NET] received packet

14[NET] sending packet

14[ENC] generating INFORMATIONAL_V1 request 2184179334 [ N(NO_PROP) ]

14[IKE] no IKE config found for xx.xx.xxx.xx...yy.yy.yy.yy, sending NO_PROPOSAL_CHOSEN

14[ENC] parsed ID_PROT request 0 [ SA V V V V V V V V V V V V V V ]

14[NET] received packet

10[NET] sending packet

10[ENC] generating INFORMATIONAL_V1 request 1373831337 [ N(NO_PROP) ]

10[IKE] no IKE config found for xx.xx.xxx.xx...yy.yy.yy.yy, sending NO_PROPOSAL_CHOSEN

10[ENC] parsed ID_PROT request 0 [ SA V V V V V V V V V V V V V V ]

10[NET] received packet

13[NET] sending packet

13[ENC] generating INFORMATIONAL_V1 request 2729080853 [ N(NO_PROP) ]

13[IKE] no IKE config found for xx.xx.xxx.xx...yy.yy.yy.yy, sending NO_PROPOSAL_CHOSEN

13[ENC] parsed ID_PROT request 0 [ SA V V V V V V V V V V V V V V ]

13[NET] received packet

Could someone give me some advise with this?

Br,

Ville

[Martin Aleksandrov]

Hello,

At first sight something with the IKE configuration isn't configured correctly. Have you tired full configuration steps as explained in the follwoting guides:

https://www.youtube.com/watch?v=JiHwR7cBxz4

https://www.cisco.com/c/en/us/support/docs/smb/routers/cisco-rv-series-small-business-routers/smb5527-configure-client-to-site-virtual-private-network-vpn-connect.html

It is the same logic and steps as the RV34x series.

Regards,

Martin