01-30-2018 12:40 AM - edited 03-21-2019 11:03 AM
Hi Support,
I've been struggling to establish VPN IPSec tunnel between Cisco RV042G and Linksys RV042 routers for the last few days and unfortunately to no avail.
I got Cisco RV042G VPN IPSec connected to SonicWall router. I think the problem lies in Linksys RV042 but I'm not sure.
is it a problem with Linksys RV042 firmware version and upgrading it might fix the vpn ipsec issue?
Is it possible to establish VPN IPSec tunnel between Cisco RV042G and Linksys RV042 routers at all?- if yes, then
Will it be stable?
Let me give you more system info:
Linksys RV042 Firmware Version: 1.3.12.19-tm (I think it's the latest firmware version)
Cisco Small Business Router RV042G Gigabit Dual WAN VPN Router v4.2.2.08 (Apr 26 2013)
Please have a look at an attached files with VPN IPSec config on both routers
Thank you in advance.
01-30-2018 01:37 AM
Please,
Colect some logs to us analyze.
01-30-2018 03:39 AM
Hi,
Let me give you an update.
I finally managed to get VPN IPSec tunnel up and running. It was my mistake because of mismatched preshared key.
Another problem followed up since I got VPN IPSec tunnel up and it is I cannot ping, traceroute or network browse a host in remote network (192.168.30.100).
Here are the ping tests I've done so far:
- ping and tracert to PC on network 192.168.30.0 are successful from PC (192.168.10.0) LAN connected to Cisco RV042G (192.168.10.1) but cannot browse or access that PC's shared folder over Windows/File Explorer.
-ping or tracert to PC on network 192.168.10.0 are unsuccessful from PC (192.168.30.0) LAN connected to Linksys RV042 (192.168.30.1), cannot browse or access that PC's shared folder over Windows/File Explorer but can open and log into Cisco RV042G via web browser.
What router/firewall settings do I need to change.
Thank you in advance.
01-30-2018 03:55 AM
This is firewall rule, please check if you are permit smb ports and rdp ports or make a rule permit any just to test in both sides.
01-30-2018 04:17 AM
Hi lucaslara,
Thank you for that.
I forgot to mention that I can rdp to a host on remote network and also other way around but cannot access shared folders on remote host via file explorer.
I don't think I need to allow smb on firewall as I'm able to browse any shared folders on remote hosts behind sonicwall that rv042G router is currently vpn ipsec connected to.
I'd like to report for another issue that followed up and it's vpn ipsec tunnel has gone down and couldn't get it back up despite turning Aggressive mode of and on on both router and restarting Linksys RV042 router.
it looks that the vpn ipsec tunnel is not stable.
Here are the latest vpn logs taken from linksys rv042:
Jan 1 02:22:49 2003 | VPN Log | initial Aggressive Mode packet claiming to be from Cisco RV042G WAN on Cisco RV042G WAN but no connection has been authorized |
Jan 1 02:22:49 2003 | VPN Log | Ignoring Delete SA payload: not encrypted |
Jan 1 02:22:49 2003 | VPN Log | Ignoring Delete SA payload: not encrypted |
Jan 1 02:22:49 2003 | VPN Log | Ignoring Delete SA payload: not encrypted |
Jan 1 02:22:49 2003 | VPN Log | Ignoring Delete SA payload: not encrypted |
Jan 1 02:22:49 2003 | VPN Log | Ignoring Delete SA payload: not encrypted |
Jan 1 02:22:49 2003 | VPN Log | Ignoring Delete SA payload: not encrypted |
Jan 1 02:22:49 2003 | VPN Log | Ignoring Delete SA payload: not encrypted |
Jan 1 02:22:49 2003 | VPN Log | Ignoring Delete SA payload: not encrypted |
Jan 1 02:22:49 2003 | VPN Log | Ignoring Delete SA payload: not encrypted |
Jan 1 02:22:49 2003 | VPN Log | Ignoring Delete SA payload: not encrypted |
Jan 1 02:22:49 2003 | VPN Log | Ignoring Delete SA payload: not encrypted |
Jan 1 02:22:49 2003 | VPN Log | Ignoring Delete SA payload: not encrypted |
Jan 1 02:22:49 2003 | VPN Log | Ignoring Delete SA payload: not encrypted |
01-30-2018 07:00 AM
Hi,
I did delete and recreate vpn ipsec on both routers, rebooted linksys rv042 and then manually setup the time and date on linksys rv042, and then tried establishing vpn ipsec from linksys rv042 to no avail.
here are the latest vpn logs taken from linksys rv042:
Jan 30 04:50:23 2018 | VPN Log | Initiating Main Mode |
Jan 30 04:50:23 2018 | VPN Log | [Tunnel Negotiation Info] >>> Initiator Send Main Mode 1st packet |
Jan 30 04:50:23 2018 | VPN Log | Ignoring Vendor ID payload [6047668ef7505936...] |
Jan 30 04:50:23 2018 | VPN Log | Ignoring Vendor ID payload [4a131c8107035845...] |
Jan 30 04:50:23 2018 | VPN Log | Received Vendor ID payload Type = [draft-ietf-ipsec-nat-t-ike-03] |
Jan 30 04:50:23 2018 | VPN Log | Ignoring Vendor ID payload Type = [draft-ietf-ipsec-nat-t-ike-02_n] |
Jan 30 04:50:23 2018 | VPN Log | Ignoring Vendor ID payload Type = [draft-ietf-ipsec-nat-t-ike-02] |
Jan 30 04:50:23 2018 | VPN Log | Ignoring Vendor ID payload Type = [draft-ietf-ipsec-nat-t-ike-00] |
Jan 30 04:50:23 2018 | VPN Log | Received Vendor ID payload Type = [Dead Peer Detection] |
Jan 30 04:50:23 2018 | VPN Log | [Tunnel Negotiation Info] <<< Initiator Received Main Mode 2nd packet |
Jan 30 04:50:23 2018 | VPN Log | [Tunnel Negotiation Info] >>> Initiator send Main Mode 3rd packet |
Jan 30 04:50:23 2018 | VPN Log | [Tunnel Negotiation Info] <<< Initiator Received Main Mode 4th packet |
Jan 30 04:50:23 2018 | VPN Log | [Tunnel Negotiation Info] >>> Initiator Send Main Mode 5th packet |
Jan 30 04:50:25 2018 | VPN Log | Discarding duplicate packet; already STATE_MAIN_I3 |
Jan 30 04:50:25 2018 | VPN Log | Discarding duplicate packet; already STATE_MAIN_I3 |
Jan 30 04:50:25 2018 | VPN Log | Discarding duplicate packet; already STATE_MAIN_I3 |
Jan 30 04:50:25 2018 | VPN Log | Discarding duplicate packet; already STATE_MAIN_I3 |
Jan 30 04:50:25 2018 | VPN Log | Discarding duplicate packet; already STATE_MAIN_I3 |
Jan 30 04:50:25 2018 | VPN Log | Discarding duplicate packet; already STATE_MAIN_I3 |
Jan 30 04:50:25 2018 | VPN Log | Discarding duplicate packet; already STATE_MAIN_I3 |
Jan 30 04:50:25 2018 | VPN Log | Discarding duplicate packet; already STATE_MAIN_I3 |
Jan 30 04:50:32 2018 | VPN Log | Discarding duplicate packet; already STATE_MAIN_I3 |
Jan 30 04:50:32 2018 | VPN Log | Ignoring Delete SA payload: not encrypted |
Jan 30 04:50:33 2018 | VPN Log | Received informational payload, type INVALID_COOKIE |
Jan 30 04:50:33 2018 | VPN Log | Received informational payload, type INVALID_COOKIE |
Jan 30 04:50:33 2018 | VPN Log | Received informational payload, type INVALID_COOKIE |
01-30-2018 07:56 AM
Please,
Check if you enable Netbios Broadcast on your RV042
If you have a some trouble, please read the follow article.
https://sbkb.cisco.com/CiscoSB/ukp.aspx?pid=2&vw=1&articleid=568
01-30-2018 07:42 AM
You are permit the follows ports?
TCP : 139,445
UDP: 137,138
Maybe it solve your problem with shared folders
01-30-2018 11:12 PM
Hi lucaslara,
Thanks a lot for your help.
I couldn't get the vpn ipsec tunnel back up even changing some settings in Advanced, and I'm about to give up on it. I think I can't get it resolved.
Please have a look at the latest vpn logs taken from Linksys RV042.
If someone can read them then that might help me what else I can change to make that vpn ipsec working again.
02-06-2018 10:18 PM
Hi lucaslara,
have you got any update on this?
Unfortunately nothing has changed since my last update despite a few tries and changes I made after that to get it resolved.
Thank you for your help.
02-22-2018 11:23 PM
Hi Support,
Let me give you an update on this.
I did manage to establish vpn ipsec between Linksys RV042 and pfSense but still no vpn ipsec between Cisco RV042G and Linksys RV042 or Cisco RV042G and pfSense.
Is it going to make any difference if I try upgrading Cisco RV042G firmware version to the latest one and give a try again?
I found the latest Cisco RV042G firmware version:
Final gpl tarball for RV0xx Series Routers firmware release 4.2.3.08 RV0XX-v4.2.3.08-20161206-code.bin |
14-FEB-2017 |
I'm not sure if I can upgrade it to the latest one as v3 hardware required and I don't know what is the current version hardware of my Cisco RV042G.
Could you please help me on what is my current Cisco RV042G version hardware and to what firmware version I can upgrade it to (please have a look at screenshot with Cisco RV042G system info).
Thank you in advance.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide