09-24-2018 05:42 AM - edited 09-24-2018 06:11 AM
Hi,
I have a cisco886VA with c880data-universalk9-mz.154-3.M9.bin
l had DMVPN set on a 1841 and I would like to move it to this vDSL router.
Problem is that if I boot with advsecurity I have no eigrp, if I boot with advipservices I don't have VPN
crypto engine name: Virtual Private Network (VPN) Module crypto engine type: hardware State: Enabled Location: onboard 0 Product Name: Onboard-VPN FW Version: 1 Time running: 1226907 seconds Compression: Yes DES: Yes 3 DES: Yes AES CBC: Yes (128,192,256) AES CNTR: No Maximum buffer length: 4096 Maximum DH index: 0050 Maximum SA index: 0050 Maximum Flow index: 0100 Maximum RSA key size: 0000 crypto engine name: Cisco VPN Software Implementation crypto engine type: software serial number: D58048B2 crypto engine state: installed crypto engine in slot: N/A
Is there a way to activate both features?
Here is my license information
Index 1 Feature: advipservices Period left: Life time License Type: Permanent License State: Active, In Use License Count: Non-Counted License Priority: Medium Index 2 Feature: advsecurity Period left: Life time License Type: Permanent License State: Active, Not in Use License Count: Non-Counted License Priority: Medium Index 3 Feature: ios-ips-update Period left: Not Activated Period Used: 0 minute 0 second License Type: EvalRightToUse License State: Active, Not in Use, EULA not accepted License Count: Non-Counted License Priority: None
regards
memmas
Solved! Go to Solution.
09-27-2018 02:21 AM - edited 09-27-2018 02:22 AM
OK.. I found the problem , still trying to resolve it on another discussion, but it's NOT a license issue....
09-27-2018 02:21 AM - edited 09-27-2018 02:22 AM
OK.. I found the problem , still trying to resolve it on another discussion, but it's NOT a license issue....
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide