08-28-2014 02:04 PM
Fellow Cisco Experts,
I have pretty much googled my brains out trying to figure out why we can't access our Vitek DVR on our iPhones. It seems as if the TCP ports for 554 and 8081 work, but UDP ports do not. The public IP is 70.175.15.103 and the private DVR ip is 192.168.43.96. I'm fairly new to Cisco CLI, and I've opened ports on normal routers with ease. This, however, has got me beat. Can someone please help me out? The config is attached.
Thanks
Kris
08-29-2014 07:26 PM
Hi kris
dont see any access list entries mentioning UDP.
test to see if access list is the issue , by removing the access list from fastEthernet 8
no ip access-group wan-in in
do this for a couple and see if you can then access the DVR.
regard Dave
09-01-2014 01:32 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide