cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
421
Views
0
Helpful
1
Replies

Cisco c1111- 8p

Monti1800
Level 1
Level 1

Hello Everyone,

Reaching out to see if its possible to set up high availability on this router with the same ip address with 2 interfaces. Basically if we have some sort of hardware failure we are wanting the failover to switch to the other port. Router "Cisco c1111- 8p"

 

We would want g0/0/0 to be the primary and g0/0/1 to be the failover. 

 

Thanks in advance. 

1 Reply 1

you cannot configure same IP for two interfaces in same router.

Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB