11-11-2011 06:36 AM
Hi,
We have a new optical fiber connection from a new ISP (only for Internet) and we found that our Cisco router RV220w won't work with this new connection because is not possible to add the VLanID 20 for the WAN traffic, as required by our ISP/connection. Now we would like to know what Cisco routers can support this feature and that can be "similar" to the RV220w or if there is another way to solve this problem and maintain our actual RV220w, because the features on this particular router (apart of the VLanID on Wan) are more than enough for us - Can someone help?
PS: We would like to have a “simple” router and with firewall and VPN features as RV220w, because the one that our provider says that works seems to be too much for us Cisco 2951-SEC K9 – We are a small company with a network of around 10 computers and we only need some VPN connections for our sales companies in Europe and workers when travelling (3-5 VPN connections are OK).
Thanks in advance and Best Regards,
11-11-2011 08:19 AM
SA520 with the MR5 firmware supports it.
11-11-2011 12:07 PM
Check also SRP520 family. We use SRP with VLAN and VPN without problems.
Regards.
11-17-2011 06:15 AM
For fiber connections up to 20mb you could get a cisco 881-sec-k9
they are much cheaper then the cisco 2951.
if your internet speed is higher you could get a cisco 891 which can handle a 50mb line.
here is a page with cisco router performance stats:
http://www.cisco.com/web/partners/downloads/765/tools/quickreference/routerperformance.pdf
Hope this helps you.
Regards,
Tom
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide