CISCO RV016 For 20 site-to-site VPN

[Diego.Satizabal1]

Best regards

Currently I've got one RV016 and one RV110W router to try and interconnect one of our branches (clothes retail) with the central site, we've managed to install them and VPN works just fine, but we have 19 more stores nationwide.

At the stores we may have 2 to 8 computers as point-of-sale, one of them acting as server to our system, that server is required to connect to the main server at the central office.

My question is: We've received some advice from people saying that these equipement are too small to connect our 20 stores, does anyone know if this is true? are these RV series suited for this quantity of branches connection?

Thanks in advance for any support!

[crvscience8]

while exploring the fascinating world of space jelly, I couldn't help but appreciate the robust capabilities of the CISCO RV016, especially for managing 20 site-to-site VPN connections.

[balaji.bandi]

As per the Datasheet that is not possible on that model :

https://www.cisco.com/c/en/us/products/collateral/routers/rv110w-wireless-n-vpn-firewall/data_sheet_c78-660141.html

Look at the RV34X models - they support more tunnels

https://www.cisco.com/c/en/us/products/collateral/routers/small-business-rv-series-routers/datasheet-c78-742350.html

Note : these models are End of Life.

If you look other model of the Cisco products - depends on budget it will be not a commercial viable.

check Meraki - they have Controller (sit at head end and Branch can connect to VPN concentrator)

https://documentation.meraki.com/MX/Site-to-site_VPN/Configuring_Hub-and-spoke_VPN_Connections_on_the_MX_Security_Appliance