11-08-2017 10:39 AM - edited 03-21-2019 10:58 AM
Hello guys! I'm new to the world in the universe cisco routers.
My company gets a dual router cisco dual wan for internet contigency.
I have an internet ADSL (PPPOE) in which I would like to connect the wan1 port of my router, it assigns user and authentication password of my modem to the router without success. So my question is:
Do I have to leave my modem in bright mode and the router to distribute dhcp?
Is it any problem to keep DHCP and PPPOE active on the modem and router?
11-08-2017 01:24 PM - edited 11-08-2017 02:08 PM
THis is not the RV320 specifically, but you can try tis: https://supportforums.cisco.com/t5/small-business-support-documents/basic-setup-wizard-on-rv32x-vpn-router-series/ta-p/3171443
Also, Please click "Accept as Solution" if this helps you.
11-09-2017 02:39 AM
thank you Green Martin.
I will try here again.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide