Hi all experts,
i am trying to configure cisco Rv042 router on dual wan mode to work it as load balance.
i have 2 dsl router (one is bettle other one is Dlink DSL-2730U) working with airtel DSL internet both configured as DHCP and working okay.
when i am trying to connect it with cisco rv042, Dlink is providing local (192.168.0.X) ip on cisco rv042 WAN1 port by DHCP, but Bettle is not providing any local ip to cisco rv042 WAN2 port.
I tried all the possible issue with but still not receiving any local ip on WAN2 of cisco rv042 router.
1. First i check DHCP issue on Bettle modem (it working, providing ip (192.168.2.x) to my local PC.
2. Change cable of Dlink modem to WAN1 to WAN2 port (Port is okay) WAN2 is working okay.
Should i check modem configuration as PPPoE mode or Bridge mode.
Could you people help me in the same issue, it will be highly great-full.
