Creating a Guest WiFi on the Cisco RV130W?

[Andrew45615]

I need to know how to create a Guest WIFI in case my family members or friends come over on the Cisco 130W Small Business router. I read through the Admin Manual Guide online, but it is confusing. Do I need to create a VLAN ID first and then add that on the Network section as the Guest Network?

[balaji.bandi]

here is the guide to create one :

https://www.cisco.com/c/en/us/support/docs/smb/routers/cisco-rv-series-small-business-routers/smb5054-configuring-a-guest-wireless-network.html

[Andrew45615]

I should of mentioned that I read that same guide you posted. However,  the guide mentions other network switches and appliances like the SG300 or the WPA371. I only have a modem from my ISP and the RV130W router.  So, in that case, which steps should I need to follow from the guide to configure a Guest WiFi only on the RV130W router?

By the way, is this model of router still supported?

https://www.cisco.com/c/en/us/products/collateral/routers/small-business-rv-series-routers/eos-eol-notice-c51-739127.html

[balaji.bandi]

Most of the process is same you creating 2 SSID one of Guest and one for your use.

the document provide you guidance on how you can achieve creating SSID and allocate and allowed rules same

another guide: Hope this helps you in short.

https://www.cisco.com/c/en/us/support/docs/smb/routers/cisco-rv-series-small-business-routers/smb4941-enabling-multiple-wireless-networks-on-rv320-vpn-router-wap3.html

[Andrew45615]

I am still a bit confused about the port assignments such as Tagged, Untagged, and Exclude.

The guide is not for my scenario as I only have a basic Home network setup using a modem and the RV130W router. So this case, what should I choose as the port assignment for the Guest WiFi?