Cyberoam 35ing to Cisco rv320 vpn router configuration

[edp415110]

Hello team,

I am rajesh and.i have certain problems in site to site vpn configuration .Let me explain the the topology.

Site 1:Main Office

Gateway device: Cyberoam 35ing

Having static ip : 59.x.x.x

Site 2:Branch Office

Gateway device :Cisco RV320 router

Not Having static ip

We tried to created vpn tunnel between both sites. But we couldnt eatablish any vpn between these devices.And while observing the security gateway types in cyberoam,

Anyone have exprience in this scenario.

Kindly help to sort out vpn connection...

Thanks & regards,

Rajesh

[ktonev · Accepted solution]

Hello Rajesh,

Please follow the instructions in this guide for the RV320 configuration - https://sbkb.cisco.com/CiscoSB/ukp.aspx?vw=1&docid=00645babb1594fa09183f20ad79c2f40_Gateway_to_Gateway_VPN__Virtual_Private_Network__Configurati.xml&pid=2&respid=0&snid=4&dispid=0&cpage=search

Please also make sure that you are using identical configuration settings across the other devices as well, also make sure that the pre shared key is identical.

If the site using the RV router does not have a static IP it may be worth to use a dynamic DNS service such as DynDNS, otherwise you will have to manually reconfigure the router every time that your ISP is renewing the DHCP lease and your IP changes.

If you are still experiencing issues, please post log message from the RV router or give us a call so an engineer can assist you further.