07-30-2013 06:38 AM
I have one SRP 521W router, It is slow when I configure it,And the memory utilized very high(94%),but the CPU is nice.
I was upgraded the last release firmware,The memory utilization keep in 78%,But I am still feeling it slowly when I configured it,How can I fix or correct configure it,Can to reduce the memory utilization. I have one SRP 521W router, It is slow when I configure it,And the memory utilized very high(94%),but the CPU is nice.
I was upgraded the last release firmware,The memory utilization keep in 78%,But I am still feeling it slowly when I configured it,How can I fix or correct configure it,Can to reduce the memory utilization.
Solved! Go to Solution.
08-01-2013 09:16 AM
Dear Shipeng,
Thank you for reaching Small Business Support Community.
Since the firmware upgrade did not fix the problem, you can try disabling some by default enabled services that you may not need; things like:
Administration > Remote Management > SNMP and Local TFTP.
Network Setup > UPnP
Administration > Log
Network Setup > Firewall > Firewall Filter
If no Internet Protocol Television (IPTV), Network Setup > IGMP
You may also check on the Internet Access Control entries to get rid of any not needed entries. Please check these out and let me know if there is any further assistance I can help you with.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.
08-01-2013 09:16 AM
Dear Shipeng,
Thank you for reaching Small Business Support Community.
Since the firmware upgrade did not fix the problem, you can try disabling some by default enabled services that you may not need; things like:
Administration > Remote Management > SNMP and Local TFTP.
Network Setup > UPnP
Administration > Log
Network Setup > Firewall > Firewall Filter
If no Internet Protocol Television (IPTV), Network Setup > IGMP
You may also check on the Internet Access Control entries to get rid of any not needed entries. Please check these out and let me know if there is any further assistance I can help you with.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.
08-02-2013 05:29 PM
Thanks very much,I will try it,Actully,I was disable some voice feature,I don't need them now,The router is better then before.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide