How to Configure VPN in RV016 using Qucik VPN for Windows 7 and Windows 8?

[Global Networks]

                Hi guys,

we have Cisco RV016 VPN Router configured with local subnet of 10.10.10.0/24 and one Static IP 117.218.xxx.xxx.for Local Gateway which is connected in WAN1 interface of RV016 Router.

I have created the VPN tunnel in client to gateway as well as group vpn and created the users as well.

i bounded the protocols for IP sec UDP500,UDP4500,TCP 10000,L2TP 1701 in dual wan page.

i enabled all the firewall rules except remote management.

I am using the quick vpn client in windows 7 machine which is connected but i unable to access the LAN devices like Host,printer,camera etc.

I used the qucik vpn in windows 8 machine its says "Remote gateway not responding.do u want wait? "

i will be happy and will appriciate if you guys give right solution

Regards

Karthik

[aunrein]

Hello,

Here is an article that discusses an alternative to QuickVPN for Windows 8.

Alternative VPN Setup for Windows 8 on the RV016, RV042, RV042G and RV082 VPN Routers

Let me know if this helps.

Alex