3 Hello @johnwhite25234,
Hope you are doing well!
My name is Anton and I am part of Cisco SMB Support Team.
What I notice is that you put 10.0.0.3/24 on your computer while you have configured 10.0.0.160/27 on the router.
From router's perspective 10.0.0.3 is out of the 10.0.0.160/27 subnet on vlan 1 and will not accept it.
My recommendation is either to extend subnet on vlan 1 on router to 10.0.0.1/24 or assign to your PC IP address from 10.0.0.160/27.
Kind Regards!
Anton Gekov
Technical Consulting Engineer – Level 1
Global CX Centers – Small Business Support