Is QuickVPN compatible with the RV130?

[stringinator]

I'm having trouble getting the Shrewsoft client to work with this small biz VPN router.  I'm hoping for a quick solution using QuickVPN.  As I understand it, since this router does not support SSL, Cisco's AnyConnect will not work with it.

[jigthaku]

Hello,

My name is Jigar Thakur from Cisco TAC.

I hope you are doing well. Here you have a link with the compatible router list adn the RV130 is not listed.

https://www.cisco.com/c/dam/en/us/td/docs/routers/csbr/app_notes/QuickVPN_an_OL-25680.pdf

We have used the greenbow and shrewsoft VPN client with RV130 and it worked without any problem.

Thanks and regards

Jigar Thakur

[stringinator]

Hello Jigar, thanks for the quick response.

I use Shrewsoft with other VPNs but cannot get it to work properly with
this RV130. One limitation I have is that the base address (gateway) needs
to be set to 10.10.10.1. When I do that (and connect from my local machine
to the remote VPN router), all the other address ranges like 192.168.1.xxx
get blocked out. In order to use my local machine after disconnecting from
the VPN router, I have to do a full reboot before I can get 192.168.1.xxx
ranges to appear again.

Any ideas why that might be happening?